SMD OFFSET CONNECTOR

The Secure Mini Dukt™ Offset Connector offsets SMD Tube two (2) additional inches off the wall, and is usually used in multiple parallel run scenarios where a horizontal SDS Raceway is on three inch (3”) spacers, and the vertical SMD tube needs to come back to the wall to properly mount the user drop box (SEC-WM-UDB3-H1). The bend radius of the connector allows smooth cable movement across the connector. An SMD mounting bracket (SMD-WM-MB) or SMD three way (SMD-CT-3WY) is required at the top, and the SMD interface sleeve (SMD-CT-INF) or SMD mounting bracket (SMD-WM-MB) is required at the bottom of the connector to properly hold the connector to the wall.

18-gauge electro-galvanized steel. Powder Coat Finish: White Textured. Provides two (2) inch offset.

• SMD-CT-OFF-02 Data Sheet.pdf
• Holocom SMD Connector Revit.rfa